Square Receivers

STANDARD CONSTRUCTION

• 3/16” Floors, length determined by capacity
• 12 Gauge sides, front, & roof
• Tapered construction for easier dumping
• 3”x5”x3/16” Structural tubing used for back channel and roof supports
• 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center for side
  & roof stiffeners
• Industrial enamel primer & paint
• Containers are delivered completely assembled & ready for use. Including:
  Caution/Warning decals, D.O.T. Reflective Tape & any Customer supplied decals

Understructure

• 3”H Structural channel 18” on center, with full 3”H structural channel apron
• Drain holes (through floor) under each side channel
• 1⅜” Thick solid bullnose inserted 2” into rails into 2”x6”x3/16” rails
• Rear Rollers – 8” Dia.x10”W with grease zerks & ½” thick wheel plate

Doors

• Constructed with 12 gauge door sheet and frames of 3”x4”x3/16” tubing uprights & horizontal cross-members (No formed channel)
• Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers
  1 linear foot of door surface
• Guide support latch side of door
• Door safety chain uses a heavy-duty quick snap with Ratchet latch system
• Sealed Doors & Sealed Charge Opening doors available upon request
• Pinning Tunnels & Bars are available upon request

Hook Styles

• Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support
• Hook-2”x6”x3/16” A-frame with 2½” Dia. pin/bar & ⅝” thick hook plates
• Deadlift