<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%> Poynette Ironworks Inc. - Home
Poynette Ironworks Inc.


SQUARE/RECTANGLE ROLLOFFS

20yd 20ft. Square Rolloff, Deadlift w/Crane Hooks
30yd 20ft. Square Rolloff, Cable & Hook w/Decal Plate
20yd 20ft. Square Rolloff, Deadlift
w/Crane Hooks
30yd 20ft. Square Rolloff, Cable & Hook Combo
w/Decal Plate
40yd 20ft. Square Rolloff, Cable
8yd Front Load Standard Slant
40yd 20ft. Square Rolloff, Cable 10yd 20ft. Square Rolloff

STANDARD CONSTRUCTION
316” Floor, 20 ft. outside length (Custom lengths available)
• 12 Gauge sides, front & door
• Top reinforcing 3”x4”x316” tubing, 2”x6”x316” front uprights, and fully welded top corner gussets
• 10 Gauge formed, 2 bend, 5¾W side channels are spaced 30” on center
• ¾” Dia. solid tarp rails, with tarp hooks front & rear
• ¾” Dia. solid ladders, standard placement is front corner driver side & rear corner passenger side
• Industrial enamel primer & paint
• Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals, D.O.T.   Reflective Tape & any Customer supplied decals
Understructure
• 3”H Structural channel 18” on center, with full 3”H structural channel apron
• 138” Thick solid bullnose inserted 2” into rails into 2”x6”x316” rails
• Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Doors
• Constructed with 12 gauge door sheet and frames of 3”x4”x316” tubing upright on the hinge side, 2”x3”x316”   tubing on the latch side, and 2”x3”x316” tubing horizontal cross-members (No formed channel)
• Doors are on top of floor and come with a door sweep to prevent nails & shingles, ect. from falling out during   transport. Guide support latch side of door
• Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface. 20yd   & under: 2 hinges, 30yd: 3 hinges, and 40yd & up: 4 hinges
• Door safety chain uses a heavy-duty quick snap with both, Swing Lever or Ratchet latch system. (Safer & more   user friendly)
Hook Styles
• Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support
• Hook-2”x6”x316” A-frame with 2½” Dia. pin/bar & 58” thick hook plates
• Deadlift

Go to Rolloff Options for Heavy-duty Construction Upgrades & other Options
 
          Calculate container size with our Square Rolloff Cubic Yard Chart