<%@LANGUAGE="JAVASCRIPT" CODEPAGE="65001"%> Poynette Ironworks Inc. - Home
Poynette Ironworks Inc.


SQUARE RECEIVERS

42yd 20ft. Square Receiver, Cable
Square Receiver with Charge Opening Door
42yd 20ft. Square Receiver, Cable Square Receiver with Charge Opening Door
Square Receiver
70yd 35ft. Square Receiver
Square Receiver 70yd 35ft. Square Receiver

STANDARD CONSTRUCTION
316” Floors, length determined by capacity
• 12 Gauge sides, front, door & roof
• Tapered construction for easier dumping
• 3”x5”x316” Structural tubing used for back channel and roof supports
• 10 Gauge formed, 2 bend, 5¾”W side channels are spaced 30” on center  for side & roof stiffeners
• Industrial enamel primer & paint
• Containers are delivered completely assembled & ready for use. Including: Caution/Warning decals,
D.O.T. Reflective Tape & any Customer supplied decals
Understructure
• 3”H Structural channel 18” on center, with full 3”H structural channel apron
• Drain holes (through floor) under each side channel
• 138” Thick solid bullnose inserted 2” into rails into 2”x6”x316” rails
• Rear Rollers - 8” Dia.x10”W with grease zerks & ½” thick wheel plate
Doors
• Constructed with 12 gauge door sheet and frames of 3”x4”x316” tubing uprights & horizontal cross-members
  (No formed channel)
• Extra heavy-duty door hinges with grease zerks. Each hinge assembly covers 1 linear foot of door surface
• Guide support latch side of door
• Door safety chain uses a heavy-duty quick snap with Ratchet latch system
• Sealed Doors & Sealed Charge Opening doors available upon request
• Pinning Tunnels & Bars are available upon request
Hook Styles
• Cable-1¾” Cable hook with ¾” thick plate & 4” Dia.x6”W Front Rollers with grease zerks & ½” thick support
• Hook-2”x6”x316” A-frame with 2½” Dia. pin/bar & 58” thick hook plates
• Deadlift